The whole home from one router.
Put Fenris on the router, and everything behind it is bonded: laptops, phones, the TV. Nothing is installed on any of them.
RouterOpenWrt and LinuxYour server
Your homeTV, laptops, phones
Wi-Fi or cable
Your routerFenris runs here
Every link
Your serverYours alone
What happens
- Fenris runs on the router, as an OpenWrt package, or on a Linux box such as a Raspberry Pi.
- Every WAN the router has becomes a link. Fibre, a 5G modem, a tethered phone: each with its own way out.
- Devices at home connect as they always have. The router carries their traffic over every link to your server.
- The kill switch holds from early boot, for the router and for everything behind it.
- The router has a page of its own on your LAN. Home, Links, Activity, Usage, Servers, Rules, Diagnostics and Settings, sized for a phone too.
What it costs
One small processor does the work for the whole house.
- The router’s processor
- Every packet, for every device, is sealed on the router. A small router’s processor can set the ceiling before your links do.
- A router that can run it
- OpenWrt 25.12 or newer, or Linux 5.15 or newer, on a 64-bit ARM or x86 chip. A MIPS or 32-bit router can’t run it.
- Everything goes through it
- Every device’s traffic takes the tunnel unless you set it to go direct. A site that distrusts your server’s address has to be listed.
- Away from home
- A laptop or a phone that leaves the house leaves the router’s links behind. Fenris on the device itself bonds its own.
Turn it on
Install it on the router, then join your server.
| To | Command line | Router UI |
|---|---|---|
| Join your server, on OpenWrt | fenris-client join --state /etc/fenris/state '<invite link>' | LuCI, Services, Fenris |
| Install and join, on a Linux box | curl -fsSL https://dl.fenris.network/get.sh | sh -s -- '<invite link>' | On the router |
| See every link, side by side | fenris links | Links |
| Watch it, redrawn every second | fenris top | Home |
| Let a device at home go direct | fenris settings --direct-devices 192.168.1.40 | Settings, Direct, outside the tunnel |
| Find where the router’s page is | fenris ui | On the router |
Where to find it
Router UIHome. Every link, its share, and the speed over all of them as one.
On a phoneRules. The same pages, sized for a phone.
The consoleThe router’s page on your server.
The productThree of its own screens, with example data.
What it keeps
Your server counts the router as one device: one set of links, one record of sessions, one daily total. It keeps nothing by laptop, phone or TV.
Where it stops
- Your provider’s box
- A locked box from your provider can’t run Fenris. Keep it, and plug it into a Fenris router as one of its links.
- Links of their own
- Each link needs its own default route. Two cables to the same line upstream are one link.
- Wi-Fi inside the house
- Fenris bonds the router’s links to the internet. It does not make the Wi-Fi in your home reach further.