# Your fibre and your phone, working as one.

Home fibre and mobile data fail for different reasons: a cable cut, a power cut, a crowded tower. Fenris uses both at once, so when one goes quiet the class or the call carries on over the other.

The links you probably have

- **Home fibre** used all the time
- **A 5G box** used all the time, or only when the others are busy
- **Your phone** a backup, used only when nothing else works

The words on the right are the roles Fenris gives a link. You choose them.

## One day, as it plays out.

A flat in an Indian city: fibre from the local operator, a 5G box on the shelf, a phone. The router and the boxes are on the inverter. Two things go wrong today.

_Example:_ 

One made-up day at home, from 7 in the morning to 11 at night. The fibre goes quiet from 11:20 am to 2:10 pm, in the middle of a client call, and again from 7:40 to 8:25 pm when the power goes. The 5G carries everything in between. The phone, set as a backup, is not used. The one connection never breaks.

What happens 

A class is on, and a 4 GB update starts on the other laptop.

Without Fenris 

Everything rides the fibre. The update and the class share one line, and the 5G box sits idle.

With Fenris 

The update is spread over the fibre and the 5G: close to the two together, less a little for the tunnel. The class stays on the quickest link.

- Fibre used all the time
- 5G used all the time
- Phone a backup, used only when nothing else works

What happens 

Road work cuts the fibre down the street, twenty minutes into a client call. It stays out for nearly three hours.

Without Fenris 

The call freezes. You turn on the hotspot, rejoin, and explain. A download half done starts again.

With Fenris 

The call’s packets were already going out on the 5G as well, so the call carries on. Downloads slow to what the 5G gives. Nothing has to rejoin.

- 11:20 Fibre went quiet. The other links carried its traffic.
- 14:10 Fibre carries traffic again.

What happens 

The power goes, and the fibre with it: the equipment down the street has lost power too. It is back in three quarters of an hour.

Without Fenris 

The Wi-Fi is on the inverter but has nothing behind it. The film stops, and so does everything else in the house.

With Fenris 

The router is on the inverter, and the 5G was already carrying traffic, so the film plays on. The phone was set as a backup, and its data pack is left alone.

- 19:40 Fibre went quiet. The other links carried its traffic.
- 20:25 Fibre carries traffic again.

A made-up day in a home with fibre, a 5G box and a phone. Say the fibre gives 100 Mbps and the 5G 60\. The numbered lines are what the router’s Activity page says, in its own words.

## What Fenris does here

Each is a feature with its own page, where it says what it costs.

**[Every link at once](https://fenris.network/features/every-link-at-once)**

The fibre and the 5G box both carry traffic all day, as one connection to your server.

**[One download, every link](https://fenris.network/features/one-download)**

A single big download uses both, not only several at once.

**[Calls that keep going](https://fenris.network/features/calls)**

A call’s packets also go out on a second link, and whichever arrives first is used.

**[A link drops, the others carry it](https://fenris.network/features/failover)**

Each link is watched in both directions. When one goes quiet its traffic moves, and it rejoins by itself when it returns.

**[Link roles](https://fenris.network/features/link-roles)**

The phone is a backup: used only when nothing else works, and never for copies of calls.

**[A way in from outside](https://fenris.network/features/port-forwarding)**

No public address from your provider? Open a port on your server to the camera recorder at home.

## What you need

[Download and platforms](https://fenris.network/download)[Run your server](https://fenris.network/download#server)

**At home**

A router running OpenWrt or Linux, with the fibre and the 5G box plugged in as its two links. Or no router: the app on the laptop, using Wi-Fi and a phone on a USB cable.

**A server**

A small Linux server in a region near you. One vCPU and 1 GB of memory are enough for a household.

**Backup power**

An inverter or a small UPS for the router and the boxes, so they outlast a power cut.

## Where it stops

- **The power takes the router.** With no backup power, the router and every link behind it go together. Fenris on the laptop itself, with the phone on a cable, still has a link.
- **Both roads fail at once.** If every link drops together, Fenris reconnects as soon as one is back. Towers lose power too: a second link is a second chance, not a promise.
- **One link is left.** It carries what it can. One link can’t be made faster.
- **A daily data pack runs out.** Fenris counts a link against a monthly cap. On a daily pack, keep the phone as a backup, so an ordinary day uses none of it.

## Questions people ask

- [Will it eat my phone’s data?](https://fenris.network/faq#phone-data)
- [Will one download get faster?](https://fenris.network/faq#one-download)
- [My Wi-Fi and my cable go to the same router. Will that help?](https://fenris.network/faq#same-router)
- [Do I need my own server, and how hard is it?](https://fenris.network/faq#server)
- [Is it a VPN? Can my bank tell?](https://fenris.network/faq#vpn)

## Try it on your own links

Tell us which links you have, and we’ll write when a build for your links is ready. Free during early access.

[Ask for early access](https://fenris.network/early-access)
